Аксиально-поршневой гидронасос HPTP 084-108 DIN Optimized.
| HPTP DIN Optimised | 084 | 108 | ||
|---|---|---|---|---|
| Теоритический расход масла при скорости насоса | rpm | 500 1000 1500 |
л/мин 41.5 83.5 125.0 |
54.0 108.0 162.0 |
| Производительность | см3/об | 83.6 | 108.0 | |
| Максимальная скорость насоса при непрерывной работе кратковременная |
rpm | 1700 2200 |
1800 2300 |
|
| Максимальное рабочее давление при непрерывной работе кратковременное |
бар | 350 400 |
350 400 |
|
| Вес | кг | 17 | 17 | |
| Момент массы (М) | Nm | 21 | 21 | Направление вращения | Левое (L) и Правое (R) |
HPTP DIN optimized is a fixed displacement bent-axis pumpsfor mobile hydraulic applications.
HPTP 084-108 DIN optimized pumps displacement range 84 and 108 cm/rev. This operating pressure reaches up to 400 bar. This modern pump meets the market's high demands due to its high flow performance, pressure efficiency and simplest of installation. Due to it is speed-optimized pump, we offer it either left (L) or right (R) rotation direction.
Further advantages:
- We use Viton- seals in front shaft seals to stand higher temperatures involved with engine mounting.
- Low noise levels at high maximum speed due to its quality production and design.
- The operation over the entire speed range is smooth.
- Long usage life due to its high demands on material selection such as seals, bearings, ect.
- То avoid leakage from the pump and РТО, there are 0-rings on all contact surfaces and double shaft seals for high pressure.
Запросить цену
