Аксиально-поршневой гидронасос HPTP 12-108 DIN.
| HPTP 012-108 DIN | 012 | 017 | 025 | 034 | 040 | 047 | 056 | 064 | 084 | 108 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Теоритический расход масла при скорости насоса | rpm | 500 1000 1500 |
6.3 12.6 18.9 |
8.5 17.0 25.5 |
12.7 25.4 38.1 |
17.1 34.2 51.3 |
л/мин 20.6 41.2 61.8 |
23.5 47.1 70.6 |
28.0 56.0 84.0 |
31.8 63.6 95.4 |
41.5 83.6 125.4 |
54.0 108.0 162.0 |
| Производительность | см3/об | 12.6 | 17.0 | 25.4 | 34.2 | 41.2 | 47.1 | 56.0 | 63.6 | 83.6 | 108.0 | |
| Максимальная скорость насоса при непрерывной работе в течении ограниченого времени |
rpm | 2300 3000 |
2300 3000 |
2300 3000 |
2300 3000 |
1900 2500 |
1900 2500 |
1900 2500 |
1900 2500 |
1500 2000 |
1500 2000 |
|
| Максимальное рабочее давление | бар | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | |
| Вес | кг | 8.3 | 8.3 | 8.5 | 8.5 | 11.7 | 11.7 | 11.7 | 11.7 | 17.0 | 17.0 | |
| Размеры | мм ISO G ISO G |
A B C D E F G H P Q |
97 112 202 99 97 89 97 38 50 3/4 1/2 |
97 112 202 99 97 89 97 38 50 3/4 1/2 |
97 112 202 99 97 89 97 38 50 3/4 1/2 |
97 112 202 99 97 89 97 38 50 3/4 1/2 |
113 130 228 109 109 99 106 38 50 3/4 1/2 |
113 130 228 109 109 99 106 38 50 3/4 1/2 |
113 130 228 109 109 99 106 38 50 3/4 1/2 |
113 130 228 109 109 99 106 38 50 3/4 1/2 |
123 147 259 126 126 115 123 50 64 1 1/2 |
123 147 259 126 126 115 123 50 64 1 1/2 |
| Момент массы (М) | Nm | 6.9 | 6.9 | 7.4 | 7.4 | 13 | 13 | 13 | 13 | 21 | 21 | |
| Направление вращения | Левое (L) и Правое (R) | |||||||||||
HPTP 012-108 DIN is a fixed displacement bent-axis pumps for mobile hydraulic applications
HPTP 12-108 DIN pumps displacement range 12-108 cm/rev.
Maximum operating pressure is 400 Ьаг. This pump meets the market's high demands due to it's high flow performance, pressure efficiency and simplest of installation.
Further advantages:
- Low noise levels at high maximum speed due to its quality production and design.
- The operation over the entire speed range is smooth.
- Long usage life due to its high demands оп material selection such as seals, bearings, ect.
- То avoid leakage from the pump and РТО, there аге 0-rings оп all contact surfaces and douЫe shaft seals for high pressure.
- All pumps аге test under extreme testing environment before delivery to custom.
- Easy to change the rotation of pump flow.
Запросить цену
