Показывать форму: Нет

Аксиально-поршневой гидронасос HPTP 084-108 DIN.

HPTP 084-108 DIN HPTP 084-108 DIN
НРТР 084, 108 DIN optimized for injector 084108
K-Jet 2   without 160 250 without 160 250 350
Oil flow at 97% vol. efficiency and 20 МРа rpm
500
1000
1500
2000
2500
3000
 
41.0
81.0
122.0
 
 
 
l/min
-
81.0
122.0
162.0
 
 
 
-
122.0
162.0
203.0
243.0
 
52.0
105.0
157.0
 
 
 
 
52.0
105.0
157.0
 
 
 
l/min
-
105.0
157.0
210.0
262.0
 
 
-
-
157.0
210.0
262.0
314.0
Displacement cm3/rev 83.6 108.0
Мах working pressure
min continuous
max continuous
max limited
rpm
300
1700
2200

750
2000

1200
3000

300
1800
2300

550
1500

1000
2500

1200
3000
Мах operating pressure
continuous
intermittent
bar
350
400

350
400
Weight kg 17.0 17.0
Tar-weight torque (M) Nm 21 21
Direction of rotation   Left (L) and Right (R) Left (L) and Right (R)
HPTP-DIN is a fixed displacement bent-axis pumps for mobile hydraulic applications. The combination of НРТР pump and injector K-Jet2 offers high oil flow.
НРТР 084, 108 DIN optimized pumps for injector is suitaЫe for hydraulic motor operations in closed hydraulic systems with injector K-Jet2 for pressurization of the suction side. For this it gives excellent speed characteristics and high flows. We supply it either with left (L) or right (R) rotation direction.
Further advantages:
  • Low noise levels at high maximum speed due to its quality production and design.
  • The operation over the entire speed range is smooth.
  • Long usage life due to its high demands on material selection such as seals, bearings, ect.
  • To avoid leakage from the pump and РТО, there are 0-rings on all contact surfaces and douЫe shaft seals for high pressure.
  • AII pumps are test under extreme testing environment before delivery to custom.
  • Easy to change the rotation of pump flow.

Запросить цену
HPTP 084-108 DIN